Morten

You were correct about the reverse rule - I had a some rules hidden
(masked) which I hadn't taken off - including the reverse network2-network1
(doh !) ;-)

(I really need a holiday, or a few beers - or preferrably both)

Even so, there is no seperate rule for Accept - just encrypt

And this is working so I would say that you don't need a separate Accept
rule (any comments ?)


Tim Higgins



                                                                                       
                            
                    "Morten                                                            
                            
                    Seeberg"             To:     <[EMAIL PROTECTED]>                
                            
                    <morten@seebe        cc:                                           
                            
                    rg.dk>               Subject:     Re: [fw1-wizards] VPN-1 against 
Cisco - problems             
                                                                                       
                            
                    07/09/00                                                           
                            
                    11:47                                                              
                            
                                                                                       
                            
                                                                                       
                            




> Just wanted to check something out:-
>
> We have a VPN connection which just says:-
>
> network1-network2-any-encrypt-long
>
> There is no accept line for this and no reverse of the above either.
Should
> we be having problems with this setup ?

The way I see it, you should have a problem initiating contact from
network2
to network1, but not the other way around.






#**********************************************************************
This message is intended solely for the use of the individual
or organisation to whom it is addressed. It may contain
privileged or confidential information.  If you have received
this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use,
copy, alter, or disclose the contents of this message.  All
information or opinions expressed in this message and/or
any attachments are those of the author and are not
necessarily those of Hughes Network Systems Limited,
including its European subsidiaries and affiliates. Hughes
Network Systems Limited, including its European
subsidiaries and affiliates accepts no responsibility for loss
or damage arising from its use, including damage from virus.
#**********************************************************************


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================

Reply via email to