It sounds like your machines can't 'see' each other with the SB 'protocol'
heatbeat.
Another way of checking is to login to each of you nodes then do a 'sbfc'.
If you only get data for that node, what I said above it true and you need
to get you 'control/protocol' network checked.
Along with all the other data you must have the following line in
/opt/fullcluster/etc/node.conf and tey must be the same on both node (even
the MAC address must be the same)
...
protocol = sbif0 01:02:03:04:05:06
control-ip = ?.?.?.?
control-port=3002
...
If you run the control network separate from the 'heatbeat' (as we do) then
you need an additional line
...
control = sbif1
...
You should also be running FW-1 in 'sync' mode.
Paul
--------------------------------------------------------------------------------------------
C. Paul Simons
Corporate Network Services
IHS Energy Group, Englewood, CO.
Main: +1 303 736 3000
Direct: +1 303 736 3451
Fax: +1 303 736 3860
Mobile: +1 303 748 5242
Sync Sync <[EMAIL PROTECTED]>
Sent by: To:
[EMAIL PROTECTED]
[EMAIL PROTECTED] cc:
kpoint.com Subject: [FW1]
Stonebeat Fullcluster Help plz
26-10-00 04:38
Hi,
I am setting up a stonebeat fullcluster site with two sparc machine
running FW-1.
My problem is: I can only connect to either one of the firewall at a time.
In the Stonebeat GUI in the separate management server, I expect I
will see both firewall online. But I only see one of them is online, the
other is 'disconnected' and grey in color.
I right click my mouse on the grey icon, only have two option to choose:
'change to status reporter' or 'remove'.
I go through the manual and still don't know what the 'change to status
reporter' is.... I click on it, the disconnected firewall went online and
the other went offline at once! What's up?
Thus, I cannot make both fw online...
All the connection is okay. They can ping each others. No error mesg show
up on /var/adm/messages, console, EventLog in NT.. I have no idea what's
going wrong.
Pls help me if you have any idea about my setup problem. Thanks.
P.S. I only install stonebeat snmp package in one of the FW sparc, not in
the other sparc nor the management stonebeat GUI.
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
