Re: [FW1] routing stops

[Carl E. Mankinen]

Title: routing stops

Did you check your route table? Perhaps your persistent routes somehow got removed...   I set all my manually defined routes in a .cmd file and have this exec'd along with some other initialization tasks at startup, just in case some moron deletes them or goes into the NCPA and makes a change which removes them.   Did you check the other stuff I mentioned earlier?. ----- Original Message ----- From: Baldin Vince To: 'Rocky Stefano' Cc: FW-1 (E-mail) Sent: Monday, October 30, 2000 10:51 AM Subject: RE: [FW1] routing stops The NIC’s work fine under other builds of NT.  I had this happen almost a year ago, and when I couldn’t fix things, I rebuilt the Firewall and everything worked again…   Any other suggestions would be most appreciated,   Thanks,   Vincenzo C. Baldin Network Engineer M. J. Harden Assoc., Inc. 1019 Admiral Blvd. Kansas City, MO 64106 Phone: (816) 889-1307 Fax: (816) 889-1301   -----Original Message----- From: Rocky Stefano [mailto:[EMAIL PROTECTED]] Sent: Monday, October 30, 2000 9:38 AM To: Baldin Vince Subject: RE: [FW1] routing stops   Have you bothered replacing the nic cards? Maybe they are faulty.   Rocky Stefano Echelon Systems Inc. [EMAIL PROTECTED] www.echelonsystems.com B 905-303-2811 F 905-303-2855 Cell 416-676-3177 Cell Fax 416-676-3183 Systems that work... ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ This email may contain confidential and/or privileged information for the sole use of the intended recipient.  Any review or distribution by others is strictly prohibited. If you have received this email in error, please contact the sender and delete all copies. Opinions, conclusions or other information expressed or contained in this email are not given or endorsed by the sender unless otherwise affirmed independently by the sender. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Baldin Vince Sent: Monday, October 30, 2000 10:13 AM To: FW-1 (E-mail) Subject: [FW1] routing stops All, This is my configuration: Single P-2 450 256MB NT4.0sp5 box with FW-1 4.1sp2. 2 D-Link quad port NIC's Problem: Firewall ran fine, low CPU and memory loads, for 5 weeks unbooted.  Then one afternoon, routing just stops.  Maybe 5% of the packets get through the gateway.  Reboot didn't help.  I did an fwstop, routing still didn't work properly, fwstart, same results.  Does anyone have an idea as to why routing would just die without any errors in the NT logs or FW logs? Thanks in advance, Vincenzo C. Baldin Network Engineer M. J. Harden Assoc., Inc. 1019 Admiral Blvd. Kansas City, MO 64106 Phone: (816) 889-1307 Fax: (816) 889-1301