A rough outline of my network follows:
Internet <--------> Router <----------> (Internet routable IP address)
Firewall (192.x.x.1) <-----------> (192.x.x.2) Internal Router
(175.x.x.1)<---------> Internal Network
|
(210.x.x.1) | (10.x.x.2)
|
|
|
|
|
|
DMZ
Internal WAN Router ( 10.x.x.1)
This is my problem. I've set up a VPN that has included both our Internal
Network (with the appropriate Network Objects defining the network's
addresses) and the Network Objects encompassing the WAN (i.e. Network
addresses), along with the appropriate rule base allowing access to my
Encryption Domain. In attempting to access hosts that are on the Internal
WAN, packets don't leave the above illustrated Internal WAN Router. I've
confirmed this by both pinging and doing traceroutes to these hosts, in each
case they die at the Internal WAN Router. With this sketchy diagram does
anyone have any thoughts as to what might be the problem.
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
