Tim,
Creating and or adding to network(s)?
If new network is a single, then 4 is not needed. If
multiple networks behind new NIC, then 4 is needed.
ARP work will be needed most likely.
Sane.
- -
Robert P. MacDonald, Network Engineer
Team Lead, e-Business Infrastructure
G o r d o n F o o d S e r v i c e
Voice: +1.616.261.7987 email: [EMAIL PROTECTED]
>>> <[EMAIL PROTECTED]> 11/16/00 5:46:10 AM >>>
>
>Hi
>
>We need to add some more Static NAT and non-NAT machines onto our network.
>
>Need sanity check on proposed solution:-
>
>1. Get an additional subnet from ISP (already underway anyway)
>2. Configure Internet router External Interface to have new secondary Ip
>address from new range (from Step 1)
>3. Add new LAN card to Firewall (NT SP4, FW 4.0 SP4) and address from new
>range above (from Step 1)
>4. Add route on Fwall/router appropriately
>5. Change selected user workstations to new IP address range
>6. Add new static and non-NAT rules for these workstation
>7. Do something with local arp file ?
>
>Comments please.
>
>Thanks
>Tim Higgins
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
