Actually, tcpdump is available for NT. Don't know if I'd install the
packet driver on a firewall, but tcpdump does work well. You can also
run Ethereal too...
Tcpdump (WinDump) for NT and packet driver -
http://netgroup-serv.polito.it/windump/
<http://netgroup-serv.polito.it/windump/>
Ethereal - http://www.ethereal.com/distribution/win32/
<http://www.ethereal.com/distribution/win32/>
HTH,
--- Gavin
-----Original Message-----
From: Arno Hechenberger [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 21, 2000 16:49
To: FW-1 Mailing List (E-Mail)
Subject: [FW1] --- traffic debug like cisco PIX ---
Hello out there !
Does anyone know if there is a possibility to debug traffic which passes
the FW-1 ?
On NT there is no TCPDUMP !!!
On cisco PIX it is possible to capture and analyse every packet which
passes.
Thanks in advance
Arno
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
