Hi,
I need know which is the MAC adress to do static NAT but if i use the
command ifconfig I get the same adress "0:b4:0:80:d2:9c" for both
interfaces, and I get the same if I execute the command dmesg to see the
boot messages.
# ifconfig -a
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
iprb0:flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 217.155.18.9 netmask fffffff0 broadcast 217.155.18.15
ether 0:b4:0:80:d2:9c
iprb1: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 10.1.1.1 netmask ffffff00 broadcast 10.1.1.255
ether 0:b4:0:80:d2:9c
How I can do to get the real MAC adress, I need this to
" arp -s < valid IP > < externa ether adress > pub "
Thank you.
Alberto.
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
