Edit the $FWDIR/boot/ifdev file.
add an entry for the interface type lane plus deny
"lane deny"
Don't worry about the DENY, it only applies for FastPath. Having LANE in
the file is sufficient for recognizing the interface type.
Reboot for changes to take effect. It's been some time since I did this,
but if this doesn't work try adding "lane1 deny" instead.
Jason Luke
Internet Security Systems
-----Original Message-----
From: Kevin Leong [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 05, 2000 4:21 AM
To: [EMAIL PROTECTED]
Subject: [FW1] ATM card installation
Greetings....
Has anyone tried installing an ATM card on a Checkpoint Firewall-ed Sun
machine? I have a E250 running on Firewall-1 4.1 and has to change one of
its interface (from qfe1 to lane1) to ATM card. Problem starts when I run
the script to activate the ATM card. The error stated is:
FW: i/f lane1 is not found in table (80206915)
WARNING:this interface is not monitored by Firewall-1
FW-1 IP: FW-1 has a problem registering an interface configuration command
(80206915) - blocked.
I have tried bringing down the qfe1 and reactivate the ATM card, but it
still fails.....
Do I need to add anything on the /etc/fw.boot/ifdev, as in stonebeat
configuration??? I would be very grateful if anyone could shine a light on
this!! Thanks.
Kevin
____________________________________________________________________________
_________
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
