Franklin,
You seem to have several problems.
1: There are differences between 4.0 and 4.1 for objects.C. You need to
merge the new objects.C and the 4.0 objects.C. To do this:
put your V4.0 objects.C in $FWDIR/conf as objects.V40
get the default 4.1 objects.C in $FWDIR/conf as objects.V41
run fw confmerge, after ensuring that there are no GUI clients
connected to the management station:
fwstop
fw confmerge objects.V40 objects.V41 > objects.C
fwstart
2: The GUI gets the rulebases from rulebases.fws, not from *.W. To load the
rulebases into rulebases.fws:
cd $FWDIR/conf
fwm -g *.W
NOTE: You need to have the objects.C correct first. If a rulebase
references an unknown object, then the fwm -g operation will reject that
rulebase file completely.
3: Have you got the backward compatibility module installed on the
management station, and a license for V4.0 installed? You need these to be
able to load policies to the 4.0 firewall. This is different from the case
with V4.0 management and a v3.0 firewall, where the software to manage the
3.0 firewall was bundled with the 4.0 software.
--
Timothy Frost mailto:[EMAIL PROTECTED]
EDS New Zealand Fax: +64-4-495-0473
8 Gilmer Terrace Phone: +64-4-495-0504
P O Box 3647
Wellington
New Zealand
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
