|
HI
!
Thanks
for reply !
...but
that solution is not practcable ! (I have no access to the FireWall in front of
me)
- so I
took the solution with the local.arp under NT40 and it worked
properly
Arno
Put
the arp entries for NAT into a static table in the router in front of your
firewall. That way it will forward all packets to the firewall anyways. Just
make sure you have your nat rules setup properly.
B 905-303-2811
F 905-303-2855
Cell
416-676-3177
Cell Fax 416-676-3183
Systems that work...
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This
email may contain confidential and/or privileged information for the sole use
of the intended recipient. Any review or distribution by others is
strictly prohibited. If you have received this email in error, please contact
the sender and delete all copies. Opinions, conclusions or other information
expressed or contained in this email are not given or endorsed by the sender
unless otherwise affirmed independently by the
sender.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HI
!!!
I've just installed FW-1 on Win2000. It works fine
and about 20% faster than WinNT40 on the same hardware.
... but the FW-1 kernel is ignoring my local.arp
for the static and hide NAT functions !!!!
How to solve this problem ???
It works, use the setup.exe
there are some limitations though (local.arp)
does not work and you have to turn on IP forwarding..... this is done with
a reg hack to win2k
CP will support you on this
Jon
|
