Andy:
You
should just be able to install the card and boot up the system. The new
interfaces will show up in voyager.
Depending on the device you have, you will have to go into the physical
portion of the interface configuration and set the speed
and
duplex modes. Make sure you go into the the firewall object and update
the interfaces and anti-spoofing parameters as well.
While
you upgrading the box, you may want to upgrade the IPSO to 3.3. There are some
great new features.
Good
luck,
Jimmy
-----Original Message-----
From: Fernandes, Andy (ANDF) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 03, 2001 2:12 PM
To: '[EMAIL PROTECTED]'
Subject: [FW1] Adding a second quad card to a Nokia IP440Hello:I have just received a quad Ethernet card from our Nokia dealer for a Nokia IP440 Firewall. The Firewall is running Checkpoint 4.1sp-2 on IPSO 3.2 and has a single quad card currently installed. Is anyone aware of any issues regarding the installation of a second quad card on the Firewall? Is it a simple plug and play installation as the dealer seems to think?The card came with no documentation and I could not find any documentation on the Nokia web site either.Any hints would be highly appreciated.Andy
