Re: [FW1] New IP addresses not working

[Jose Reyes]

Title: New IP addresses not working

What IP are you assigning to your external NIC? your ip address range starts at .128 but the first address is reserved for the network address and last .159 for the broadcast address. The first available IP to you is .129 . Is your FW acting as a router as well?, if you are not running any routing protocols , your ISP will have to setup static routes for you.           ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, January 15, 2001 2:55 PM Subject: [FW1] New IP addresses not working We recently had our ISP increase the number of IP addresses assigned to us. However, none of the new IP addresses will work. I had the ISP check things on their end and they say all is fine. They are pretty sure it's a subnetting problem on FW1, but I can't find anything in the setup that looks incorrect. Our IP address range is 209.203.73.128 through 209.203.73.159 with a subnet mask of 255.255.255.224. The external NIC is set up with this subnet mask and so is the FIREWALL object. Is there anyplace else in FW1 where the subnet would be that I'm missing? Thanks, Michelle _____________________ Michelle Johnston, MCSE4, CNE5 Network Manager, NHRA [EMAIL PROTECTED]