Basic steps for adding a new firewall to an existing Enterprise management
station:
1: Define it as a workstation object in the policy editor
2: Check the box saying that VPN-1/Firewall-1 is installed
3: Make sure that the version is correct
4: make sure that it is defined as an INTERNAL gateway
5: add the module to your list of remote modules [$FWDIR/conf/clients)
[Note that if you use cpconfig for this, it will re-do the
putkeys for ALL modules]
6: Add the management station to $FWDIR/conf/masters on the module
(This may be done by cpconfig)
7: run putkeys
The status viewer shows internal firewall modules only. And it requires
that the putkeys be correct, so that the management server can communicate
with the module.
Tim
--
Timothy Frost mailto:[EMAIL PROTECTED]
EDS New Zealand Fax: +64-4-495-0473
8 Gilmer Terrace Phone: +64-4-495-0504
P O Box 3647
Wellington
New Zealand
-----Original Message-----
From: Velasquez Venegas Jaime Omar [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 03, 2001 7:13 AM
To: FW1-MailingList (E-mail)
Subject: [FW1] New Firewall doesn't show up on system status!
We are trying to add a new fw installation which is oustide our LAN (that is
accessed through Internet)
After we registered new firewall in policy editor as a workstation object
and run putkey commands on both sides (Managment and Firewall) , it still
doesn't show up on system status.
Managment Module is running on Trusted Zone , we have installed
any-to-any-permit on the firewall which MM nats from but still we don't get
any response from the new firewall installation when getting interfaces or
it doesn't even show when we try to apply all the rules to all the firewall
installations.
Can anyone describe the regular process to register a *new* firewall
installation in a managment module?
Thanks
Jaime O.
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
