Depends on a couple of things. Are you changing the subnet the interface is
on? If so you may need to modify static routes configured for LAN subnets
and NAT addresses. Depending on how/if you configured anti-spoofing you may
need to modify that as well. You also need to update the interfaces tab of
the firewall object.
-----Original Message-----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: 2/11/01 2:37 AM
Subject: [FW1] Changing ip address
Hi all,
I am planning on the changing Ip address on my internal network
adapter(Lan leg)
I 'd like to verify that there is nothing else I need to do other than
changing
the address at the OS.
System: Firewall 4.1 SP2+VPN
Thanks
Niko
========================================================================
========
To unsubscribe from this mailing list, please see the instructions
at
http://www.checkpoint.com/services/mailing.html
========================================================================
========
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
