As OSPF is a multicats protocol it cannot be passed directly through the
firewall. OSPF can however be installed and configured on the firewall as
it's a supported routing protocol in gated (installed by default on hpux
10.20), or you can unicast the routing information between the routers with
eigrp.
Lars
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Bisser Paskalev
Sent: Monday, March 26, 2001 13:22
To: [EMAIL PROTECTED]
Subject: [FW1] OSPF problem, please help
Importance: High
Hi,
I have two CISCO routers connected to the firewall via two different
network cards, and i need to let OSPF go through it.
I use CheckPoint VPN-1 v4.1 on HPUX B.10.20.
Have some IDEA ?
I read the article posted in SecureKnowledgeBase in CheckPoint site
but it was only for VPN Appliances ;-((
Is it possible to allow OSPF to pass through the Normal Firewall
( I mean not Nokia's Appliense )??
Thank you in advance.
Bis
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
