Hello:
I've got the next problem:
I have installed my FW-1 as the following configuration: a valid IP address for the
external card of FW-1 (for example 10.0.0.1), and two internal non valid addresses
e.g. 192.168.10.254 for my localnet and 192.168.1.254 for my DMZ.
In my localnet I have used hidden Nat and the result is successfully, in my DMZ I've
put Static NAT using a real Internet Address, also I have put a static route in my
FW-1 server as route add -p 10.0.0.25 192.168.1.1 then, if I delete all security rules
of FW-1 I can go out using my firewalled machine throw the FW-1, and using a sniffer
I can see like the packets are translated but if I try access to my firewalled machine
using its real internet address my FW-1 ignores the packets.
Resuming, my outgoing connections are OK, but the incoming connections are lost.
The problem is not on the security rules because I've put: all all all accept.
Also I have put a file called local.apr with the ip of my firewalled machine and my
FW-1 external address and the mac address of my external firewall card in the
%%systemroot\fw1\4.1\state\ and it seems not work. I'm using FW-1 4.1 SP3 over Win2000
Server.
Thanks for all
Best Regards Javier
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
