Frank,
If I get you correctly, you want to configure two web server that
do load balancing between them ? If that is the case I think you need
to take a look at the Load Balancing contained within the ConnectControl
Module. At least that is what I understand from the Load Balancing chapter
of the CCSE manual. This is also explained in the Administrator's Guide
of 4.1, starting at page 581. Hope this helps.
Met vriendelijke groeten - Bien � vous - Kind regards
Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA & CCSE
Compaq Software Engineer - Belgium
E-mail : [EMAIL PROTECTED]
Tel: +32(02)729.77.44 (options 3 - 3 - 1)
Fax: +32(02)729.77.65
=====================================================================
This message may contain confidential and/or proprietary information,
and is intended only for the person/entity to whom it was originally
addressed. The content of this message may contain private views and
opinions which do not constitute a formal disclosure or commitment
unless specifically stated. Should you receive this message by mistake
please inform the sender immediately.
=====================================================================
-----Original Message-----
From: Frank Bonini [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 29, 2001 5:28 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: [FW1] Using load balancing object and address translation
I need to bring a second web server online behind a single firewall.
I'm running FW-1 4.1 SP 3. I'm looking at alternatives to doing this
and for now would like to avoid the hardware load balancing route (this
is a preliminary deployment until we bring our data center up where
we'll use Alteon).
One choice is to use Windows Load Balancing which would be fine except
that I have to buy Advanced Server licenses to do that. This is not out
of the question but is not desirable either. I want to explore using
the load balancing object in FW-1 instead. My current network looks
like this:
(In the following description, internal mask is 255.255.255.0.)
Firewall has 2 NICs (obviously):
External NIC has a public address assigned by ISP.
Internal NIC uses private address (172.16.10.n)
Web Server(s) have 2NICs (routing is disabled):
NIC1 is on 172.16.10.n
NIC2 is on 172.16.20.n
DB Server has 2 NICs (routing is disabled):
NIC1 is on 172.16.20.n
NIC2 is on our internal corporate network.
I am not a FW-1 expert so I'm looking for some guidance on how to setup
the Load Balancing object to work in conjunction with the address
translation in this configuration. Appreciate as much detail or
pointers to white papers or online docs that would help.
thanks in advance for any assistance.
Frank Bonini
Vice President
Operations and Security
eMoney Advisor Inc.
(610) 651-7949
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
