Marcelo,
Most probably you still have a putkey problem, that's it
most of the time, have you followed the
directions from PhoneBoy article on this ? ( see http://www.phoneboy.com/faq/0037.html )
Also look at the status op port 257/TCP on both systems ? Do
you see a connection in the
ESTABLISHED state on both systems ?
Met vriendelijke groeten - Bien � vous - Kind regards
Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA &
CCSE
Compaq Software Engineer -
Belgium
E-mail : [EMAIL PROTECTED]
Tel: +32(02)729.77.44 (options 3 - 3 -
1)
Fax:
+32(02)729.77.65
========================================
This message may contain confidential and/or proprietary
information,
and is intended only for the
person/entity to whom it was originally
addressed. The content of this message may contain private views
and
opinions which do not constitute a
formal disclosure or commitment
unless
specifically stated. Should you receive this message by mistake
please inform the sender immediately.
========================================
-----Original Message-----
From: Marcelo Martinho [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 20, 2001 9:54 PM
To: [EMAIL PROTECTED]
Subject: [FW-1] Log problem.
Hello alll,
I have one site (site A) with a Firewall-1 module version 4.1 instaled and this module is doing log on another machine at another site (site B) that has the management module and another firewall module. Last month i had to change my valid ip addresses at site A and the firewall at this site stoped to log into site B.
I perform "fw putkey" after change the ip.
Any suggestion??
Thanks in advance,
Marcelo.
