I posted this to Apple's forums today:

I just put a Travelstar 40 gnx in my 300 mhz 'book.  Installed 
Jaguar.1 and OS 9.1 without incident.
Put the replaced 20 gb Hitachi in an OWC Firewire Express enclosure. 
I have a Newer Firewire to go pc card that has always worked.

The FW drive only mounts in OS 9.1.  It does not mount OS X.2.1.

When I try to boot into X with the FW drive connected, X hangs while 
"waiting for local drives". If I unplug the drive, X finishes booting.

If I try to connect the FW drive after X is booted, I get an error: 
"You have inserted a disk containing no volumes that Mac OS X can 
read. To use the unreadable volumes, click Initialize. To continue 
with the disk inserted, click Ignore." I've been ignoring it.

I should mention that I can import DV into iMovie X without problem. 
So the Firewire card works in X.
I've been able to read and write to the FW drive when booted into 9, 
so the FW drive definitely works. I installed the latest firmware 
from OWC too.

Any ideas anyone?  Should I wipe the drive and start over?  (I posted 
a version of this issue here about a week ago.)

Thanks,

Ross Cottrell

Powerbook G3 300
512 mb ram
IBM Travelstar 40 gb gnx
Firewire to go
Macally USB
Jaguar.1
OS 9.1


-- 
G-Books is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:G-Books@;mail.maclaunch.com>
To unsubscribe, email:  <mailto:G-Books-off@;mail.maclaunch.com>
For digest mode, email: <mailto:G-Books-digest@;mail.maclaunch.com>
Subscription questions: <mailto:listmom@;lemlists.com>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to