Just fixed one on my Lombard... don't know if it might be the same problem... but looking into the port from the rear, i noticed the two outer wires in the plug were pressed down and were not making continuous contact. Pried them both up with a dental tool and it now works...

gordon





At 9:59 AM -0500 11/26/03, G-Books wrote:
Date: Wed, 26 Nov 2003 11:17:38 -0500
Subject: Non-working Ethernet Port: what's the fix?
From: "Laurent Daudelin" <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

On a Wallstreet, if the Ethernet port is not working, I'm assuming the logic
board/motherboard has to be replaced. Am I right?

-Laurent.
--
========================================================================
Laurent Daudelin                 Developer, Multifamily, ESO, Fannie Mae
mailto:[EMAIL PROTECTED]                Washington, DC, USA
************************ Usual disclaimers apply ***********************

-- G-Books is sponsored by <http://lowendmac.com/> and...

Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
-- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------




Reply via email to