Hi Listers-

I'm a new to owning a Powerbook and have some questions.

I recently bought a used 15", G4, 800 MHz Powerbook which has Panther installed. The 
seller gave me the set of system discs that came with the machine, 10.1, without the 
Panther upgrade discs and without documentation. The owner also had no need for OS 9 
so there is no classic installed. Owning a lot of older Macs with different 
requiremets for  installing OS 10, I need some help on the following,  and anything 
else that I might be over-looking from lack of experience--

I also purchased a used, full install set of Panther discs (without printed 
documentation). 

Would this software have the Powerbook CP's or any components that might exist for the 
Powerbook? I didn't see Powerbook specific Panther installation discs at Apple.

Is it necessary to partition the 60 GB drive when I install drivers for 9.2.2-to 
create a separate partition for each OS and relating to this question, does this 
machine boot in 9.2.2?

The machine is beautiful and runs very fast in Panther--I am overwhelmed by it. It 
also seems to get very hot on the bottom--Is this normal and OK?

Thanks in advance for your help.

dan_A

-- 
G-Books is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to