If you can get your source into firewire converter, or a camera that allows pass through than you should have no problem at all in Final Cut. First thing first hook up your source to your digital camera, and your digital camera to your computer. now when you play the source double check to see that it is playing into your camera if it is than you are in luck. Now bear with me because not all cameras allow pass through and some need to be set up via their menu to be able to allow pass through via firewire.
*If you can get imovie to do it than you can get final cut to do it.*
now press command 8, or go to the log and capture menu in final cut. now if you go to try and capture this footage now final cut will not recognize it..you need to click uncontrollable device as your source, it should be set as firewire ntsc right now. this menu will be in your upper right corner of your capture window just set it to uncontrollable device.. Now press play on your source deck and see if you are getting anything. sometimes you have to mess with it a bit, but this will get video into final cut. Now press capture now and press play on the source deck and Final Cut will begin to capture your footage, press esc when you are done or let it capture up until your capture time limit is reached which is set to 30 minutes by default.
what is going on here is an issue with time code. Final cut reads the time code of your dv tape and captures it by using that to control the deck. That is why you can do batch captures in Final Cut while you cannot in Imovie. When you use capture now with uncontrollable device selected you are just capturing the stream like in imovie and final cut goes ahead generates time code for the footage as you capture it.
Darrin,
Oklahoma's Final Cut Pro GURU
-- G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
