Quick question for the list I am using the original graphite base station and original airport card in this Pismo and my imac SE 400 (graphite)...Also hooked into the system is my son's Dell w/a wireless card...All working perfectly...My other son is now home with his Gateway and we can't seem to get the system to allow the network to allow the gateway to transmit/receive the signal...When it does see the network, it will not allow anything to be connected..We had this same problem when adding the Dell but somehow got it to work perfectly......My son asked about replacing the Airport w/ a new PC base station and some other type of wireless card...OBviously I would prefer to keep the current setup...Any odeas about what needs to be done to get the Airport network to see/work with the Gateway??? Regards and TIA, Mike K
Maybe you've set the network up in a way that restricts access based on MAC address (that is a unique hardware MAChine address, that all network devices, wired or wireless have)? If so, you'd have to use the Airport Admin Utility to enter your son's wireless card's address as a legitimate one - click on the "Access control" tab.
Luis Sequeira
-- G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
