"Andrew W. Hill" wrote: > >As noted in a prior note, for some reason, Western Digitals don't > >use the master or slave settings, but use a "nothing" setting on the > >G3. Pull all jumpers. I don't even know if you can use 2 on a bus > >(since I have a rev a) > > You can find this on the Western Digital web site, and there > >are discussions of it on XLR8 your mac. > > I tried it with the "single master" setting on both the internal and > UltraTek busses with no other drives in the system to no avail. > Update: CD-ROM firmware update did not help. > Next Step: XPostFacto > Thanks all > Aqua
I have a Beige G3/DT and have installed a 120GB Western Digital as master and a 40 GB drive (forget the brand) as slave on the ATA 1 buss and a CDRW as master on the ATA 0 buss (to provide booting on the generic CDRW). All work fine. Jerry Beige G3/300 DT, (rev 3), 768 MB ram, OS 10.2.6, 9.2.2 Wallstreet II /300, 512 MB ram, OS 10.2.6, 9.2.2 HP d135 DeskJet 4 in 1 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
