In a message dated 4/8/05 2:10:06 PM, [EMAIL PROTECTED] writes: > >Not yet. I was trying to make sure it worked before I did anything that >would be it's 'final position'. And yes, the heat sink was in place. >:-) > > > >The chip I picked up on ebay, URL here if insterested >(http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5763543314&rd=1&sspagenam e=STRK%3AMEWN%3AIT&rd=1#ebayphotohosting). > > > >I did see something about a CUDA switch that might need to be used. > >What is that an how do I use it?
Did you check for/install any B&W firmware updates? iirc anytime you add/change hardware you should reset the CUDA & zap pram on the restart. The CUDA switch on a B&W is located in on mobo, in front of pci slots, just to right of pram battery. Think it's labeled S4? Pull the power cord, remove the pram battery & wait 10 mintes, (some say let it sit overnight w/o battery) Press & hold the cuda button for 20-30 seconds. Reinstall the battery, reconnect power cord. Power it up & zap pram by holding down cmd+option+P+R keys for 3 -10 bongs, then release keys & let it boot. You'll have to reset clock & other pref cp's after all this. -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
