Rev 1: The start up IDE drive should be mounted to the back of the
machine and connected to the LB directly from there. (don't know
which P it is). There should be no other drives connected to it.
Other suggestions which you may have already tried:
Reset PRAM.
Buy a new PRAM battery.
Try booting from a CD.
Try a different video card.
J Sanderson
On 20 Jun 2005, at 20:26, CR wrote:
I'm just now getting to trying to boot
a B&W 350 rev 1
purchased on Lem Swap List.
One of those bad deals that precipitated the list closing.
I get the Apple tone but nothing comes on the screen
and it doesn't seem like the HD is activating.
To start the HD is plugged into P5 in a chain of plugs P2, P4 & P5
Sscondly the Rage card may not be seated properly.
The back "wall" seems bent slightly so the Rage card (video care I
guess)
can be pressed in a little tighter. Though if I do this manually
when booting
it doesn't make any difference.
Just want to make sure that this is toast and that there's no
change of a simple fix to get a boot.
All advice is of course appreciated.
--
G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:g-list@mail.maclaunch.com>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
