In a message dated 7/3/05 1:42:13 PM, [EMAIL PROTECTED] writes: << So my question: with the hardware I have, how can I test the GigE MLB? Is supplying the AGP slot's 28v critical? >>
from my understanding, yes, you need the 28V (well, i suppose you actually only need 24v). Anyway, last I checked RadioShack didnt carry a 24v wallwart and the place I found that did wanted about $90 for it. If using a Gig ethernet, my best advice is to use a gig ethernet power supply. I think the digital audio is the same. <<Also, the B & W's front panel board connector cable is different from the Sawtooth/GigE, (assuming the GigE board works) will I need to source a front panel and its cable from a Sawtooth/GigE or can I mod the B & W front panel connector to work with the GigE MLB?>> Not sure if you can mod the g3s but you can actually make your own. Heres the link: http://www.outofspec.com/frankenmac/wire.shtml Its probably easier just to find one on eBay but you CAN make your own That should round off everything. Back panel, PS, and front power board. chris -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
