In a message [EMAIL PROTECTED] writes: << In a message dated 7/12/05 6:22:45 PM, [EMAIL PROTECTED] writes:
<< I really don't want to pull the processor to check for the extra holes since the machine is currently needed daily for production. Perhaps someone else can verify the 2 hole theory. >> actually I dont think you would have to remove the heatsink. i think they should be near the heatsink, but not under it. not sure but i think thats the case, since the holes for the single processor heatsink are pretty much in the corners. >> Chris, I checked my Sawtooth rev 2 logic board today and the only holes I found near the heat sink were five holes behind the AGP Video slot. They are labeled as J28. They are arranged in a square area, one hole in each corner and one in the middle similar to the pattern you would see on the 5 side of a gaming dice cube. Don't think these are the 2 holes you are referring to. --glen (digest mode) -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
