>>> can't get the machine to recognize the Jaz drive. It does see the >>> 2GB HD, which is connected to the same ribbon cable and the same >>> power cable (there are two connectors on each). >> >> Since both devices are on the same SCSI bus, make sure they have >> different IDs. Check termintation also. > > I thought of the SCSI ID, but I didn't see anyway to change the ID on > either the Jaz drive or the HD.
Does the Jaz drive has a 40-pin connector or a 50-pin connector?? In case it has a 40-pin connector it is an IDE device and has to be set to master or slave according to what the other device on the cable is set to. If it has a 50-pin connector, it must have an unique SCSI ID -- there's usually a set of jumper some of which are marked "1", "2", and "4" for setting the SCSI ID from "0" to "7" Udo -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
