I got it all apart! thanks guys and gals!
Laura
On Sep 21, 8:24 am, Doug Burton <[EMAIL PROTECTED]> wrote:
> On Sep 21, 2008, at 5:54 PM, Dana Collins wrote:
>
>
>
>
>
> > On 9/20/08 5:00 PM, glueski of [EMAIL PROTECTED] sent
>
> >> So I am parting out my AGP Sawtooth and I can't for the life of me
> >> figure out how to get the power supply out!
> >> Can someone help with photo of some kind.
> >> I think everything else is out of the case.
> >> thanks! Laura
>
> > Hi Laura,
> > Easy enough- getting the cables freed up is the hardest part. There
> > are four
> > screws in the back end that will require a key wrench (the same size
> > that
> > you use to take the handles and feet screws off), and one case screw
> > inside
> > that bolts the PSU bracket to the chassis shelf (uses one of the stock
> > Philips-head case screws). Release all five of these and work out the
> > freed-up PSU (bottom first, then the top once it's cleared from its
> > compartment) and the wiring will be easier to snake out.
> > HTH,
> > Best regards,
> > Dana
>
> Just to add to Dana's comments, it is a lot easier to get all of the
> wiring out if you remove the fan housing. It should just be a couple
> of phillips head screws to take it out.
>
> Just a message from Doug...
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
