2008/10/27 MaGioZal <[EMAIL PROTECTED]>:
>
> Hi there,
>
>
> Is it possible to boot a Beige G3 (ROM revision B) from a HD attached
> to PCI-SATA or a PCI-ATA cards "made for PC"?
>
> Does it depend on the kind of chipset?
>
> I am asking this question because most current HDs are both SATA and
> bigger than the 128GB-limit of the Beige G3 original ATA bus.

I don't know for sure, but I would expect that the answer is "no".

I use an Ahard Acard UltraIDE RAID card in my B&W G3. This is a
Mac-specific card with Mac firmware. It works nicely and is bootable
under both OS 9 and OS X.

Whereas you might have a very long shot at getting a PC card to work
for driving secondary disks, I'd not expect a Mac to boot off anything
without Mac firmware on it.

I don't know how much Mac SATA cards are now, but probably, for the
age and spec of a Beige, you could buy an old slow G4 on eBay for
around the same cost as a SATA host adaptor. I'm seeing them going for
under £30 these days and they're cheaper in the US. I'd expect well
under $50.

-- 
Liam Proven • Profile: http://www.linkedin.com/in/liamproven
Email: [EMAIL PROTECTED] • GMail/GoogleTalk/Orkut: [EMAIL PROTECTED]
Tel: +44 20-8685-0498 • Cell: +44 7939-087884 • Fax: + 44 870-9151419
AOL/AIM/iChat: [EMAIL PROTECTED] • MSN/Messenger: [EMAIL PROTECTED]
Yahoo: [EMAIL PROTECTED] • Skype: liamproven • ICQ: 73187508

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to