On Thu, Jul 23, 2009 at 11:46 AM, glen <glenst...@yahoo.com> wrote: > > > > --- On Wed, 7/22/09, Wallace Adrian D'Alessio <fluxstrin...@gmail.com> > wrote: > > > > > Slots clean? > > > > Fully seated card? > > > > Does the B&W have such a thing as a CUDA switch? > > Reset? > > > > Do they boot still with the original CPUs? > > No slots, it is a ZIF CPU upgrade with a square matrix of 287 pins (17 x 17 > - 2 if I counted correctly) that plug into ZIF socket. > > They look clean but after a couple unsuccessful tries I spayed them with > contact cleaner and still no go. > > Forgot to mention I reset the B & W by depressing the CUDA switch. When > that did not work I left the PRAM battery out overnight still no chime or > boot the following day. > > When I put the original CPU's back with the original jumper blocks both B & > W's boot without issue. > > Looks like the Sonnet is dead. Thanks for the reply --glen > > _________________________________________ >
I hope it didn't cost too much. I hate when stuff like that happens. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
