At 6:55 AM -0500 8/28/2009, Stephen Conrad wrote: >OK, the HD that came in this G4 is dying >I cloned the HD to another HD I own >I then tried to swap out the HDs after telling (in System Prefs) he >machine to boot from the new HD >However, it REFUSES to boot unless the old failing HD is present. >How do I force he machine to let me take out the bad HD?
Sounds like the old drive was master and new drive isn't, the new drive needs the master present on the ide bus? If that's not the case then.... Zap the pram then reselect the new boot volume. And I think when booting if you hold down opt-cmd-shift-DELETE, you will cause OF to skip the default volume and seek for another. And holding down the option key, (I think that's right), will tell OF to let you select. And you could always just disconnect the failing drive, so OF doesn't find it... - Dan. -- - Psychoceramic Emeritus; South Jersey, USA, Earth. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---