On Nov 12, 2010, at 10:43 AM, John Carmonne wrote: > I have a PM G5 Dual 2.7 that I just replaced the heat sink on. It had leaked > and I was able to catch it before it did any real damage. > After I did the installation I booted ASD 2.5.8 and the Calibration page said > that calibration wasn't needed. The "OS" and "OF" passed. Also I have > "Hardware Monitor and all the temps and pump RPM's are correct. > > But just for laughs I went back and ran the ASD fan calibration to see what > it would say and to my surprise it said that I need to replace both > processors which I'm thinking this is not correct because every thing seems > to be working properly, the fans sound like they're cycling correctly and all > the other tests pass. Can this be because the heat sink is not the original > and the report is false? > Update I got ASD 2.5.7 and upon booting and selecting the Thermal calibration is says calibration not needed. And It will not allow the initiation of the calibration operation, however the ASD 2.5.8 says not needed but will let me try anyway. So I think that the 2.5.8 may produce a false reading if calibration is not needed. And again the "OS" and "OF" passed all two hours of it :-)
John Carmonne Yorba Linda USA Sent from my MBP -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list