On Sun, Jan 2, 2011 at 3:31 PM, John Carmonne <carmo...@aol.com> wrote:
>
> On Jan 2, 2011, at 12:54 PM, Greg Kennedy wrote:
>
>> After some more time of thinking about it, I'm considering going with a 
>> really crazy solution and using 9.2.3 on the machine + Logic 6.4.3 + Pro 
>> Tools Free (if I can find it) + Finale 2003.  Way outdated software but it's 
>> more than enough for our needs, and won't require any more hardware to be 
>> purchased (SB Live has OS9 drivers from what I understand, 640mb RAM should 
>> be enough too)
>>
>> Does OS 9, or any of the three tools I mentioned, support both processors in 
>> the dual 533 G4?  If not I'll definitely go Tiger.
>>
> That machine will run OS 9.2.2 in fine fashion, very fast. however you may 
> need a special ROM to boot OS9 on that PowerMac G4.
>
>


Thanks for all the tips everyone.  I have another question about
graphics cards.  First, my progress:

* Formatted, installed 9.2.1, upgraded to 9.2.2.  Managed to complete
the firmware upgrade to 4.2.8 (yay!).
* Discovered that the SB Live 1.1 drivers will not work for me.  I
don't know why, but after installation it complains that the drivers
were not installed properly and to try again.  It could be that my
card is not supported and the error message is just confusing.  I
tried searching for the 1.0rc1 drivers instead, hoping to install
those first and then try a 1.1 upgrade, but I couldn't find them
anywhere.
* Also discovered that the Midisport Uno that I have is not OS9
compatible.  http://forums.m-audio.com/archive/index.php/t-1985.html

Okay so 9.2.2 is not going to work.  About to install 10.4 Tiger from
scratch instead, and simply hope for eventual recording support from
the Kx Drivers project.

I had a question about the graphics card.  This is a Geforce 2 MX with
32MB of RAM.  I have in the garage a Geforce 3 of some sort, which I
think would benefit Tiger thanks to the higher speeds and more RAM.
Can I drop this card in the AGP slot, or is it unlikely to work?  I
know there is something or other about changing firmware on a video
card to make it Mac-compatible but I don't know anything about that.

-Greg

-- 
You received this message because you are a member of G-Group, a group for 
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list

Reply via email to