Thanks for all the replies so far! Here is my setup:
Modem > Buffalo Wireless G Router > Wireless WET54 Ethernet Bridge(connected wireless) > NetGear Wired Router > Computer running Leopard. I am able to access both the admin page of the WET54, as well as the NetGear router. I reset both to factory settings. I connected the bridge to my wireless Buffalo router, and set the bridge to be configured by a DHCP server, which is the NetGear router. In the process of typing this, I just realized that the Buffalo is a DHCP server, AS WELL as the NetGear router... I will need to disable the DHCP server setting on one of those routers for it to have the possibility of working correctly. I have read the manual, and set all the settings as it suggested. I will change the DHCP server setting on the NetGear tomorrow and see if that fixes it. I'll report back then. Thanks! -Jonas -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list