Original message from smac0031, 2015-05-31 04:34: > I got a 2TB sata HD and Pata Sata converter for it to use in my DA G4 > running 10.1.11. > > It's hooked up to a 133ATA card. I have 120GB boot drive and 300GB data > drive. > > The computer just hangs on boot-up. The optical drive does nothing. > Starting with the optical empty > does nothing. The computer just hangs. > > It's had startup issues for some time. It order to reboot it you have to > use the button on the front. Same > for shutdown. I just let it run all the time. > > Looks like the giant 2TB is useless for this machine and I realize this > computer is 15 years old. Unless somebody > has some ideas. > > Thanks > Mark Murphy Hello Mark!
I'm late, I know, but I just found this thread. Maybe I missed it, but nobody mentioned block sizes. Newer drives tend to be Advanced Format, meaning, each sector (physical block) on the drive is not exactly 512 bytes anymore, but a multiple of that. Most HDDs use a block size of 4096 bytes i.e. 4k. The problem is that most older computers, firmwares and operating systems really require this 512 bytes block size. That is why a lot of HDDs with Advanced Format use emulation. Instead of reporting the true block size of 4096, they will report 512, in which case you'd be safe and could use the drive. If, on the other hand, you purchased a drive without emulation, it will report the native block size of 4096. This could have various effects, including stalling the system completely. You should read about Advanced Format on Wikipedia: https://en.wikipedia.org/wiki/Advanced_Format Does your drive have an "Advanced 4K Format" or an "Advanced 4Kn Format" logo? The later, with the letter "n" ("4Kn" versus just "4K") indicates native mode, which will most likely cause problems. You should get a drive with 512 byte block size emulation, i.e. one with the "Advanced 4K Format" logo (without "n" for native – i.e. with an invisible "e" for emulation ;-)). Cheers, Andreas aka Mac User #330250 -- -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list --- You received this message because you are subscribed to the Google Groups "G-Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to g3-5-list+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
