Okay, I haven't tested it yet, but I did find what seems to be the correct firmware updater image here. I'll test it this evening.
https://www.macintoshrepository.org/8007-powerlogix-newertech-g4-enabler John On Monday, October 23, 2017 at 10:47:46 AM UTC-4, John Miller wrote: > > Hi everybody, > I recently got my hands on a Powerforce Dual G4 CPU upgrade, incorrectly > installed in a Sawtooth with a 100MHz bus. I'd like to be able to use this > in a DA or Quicksilver, but I'm trying to find more information first. I > eventually found this manual hosted on OWC ( > https://eshop.macsales.com/tech_center/manuals/powerlogix/74477457/tower.pdf) > which is correct to my upgrade. However, I can't yet find a disk image of > the firmware updater tool. > > I've sent out a few emails to companies like OWC and other mac parts > resellers to see if they have anything laying around, but haven't heard > back yet. If anyone here could point me in the right direction I'd greatly > appreciate it. > > Thanks! > John > > -- -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list --- You received this message because you are subscribed to the Google Groups "G-Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to g3-5-list+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.