i just try to use 2.3alpha1 on my Dell latitude D620 and G4U stops after few seconds.
the last lines are : midi0 at pcppi1 : PC speaker sysbeep0 at pcppi1 pnp0c01 [system board] at acpi0 not configured pnp0000 [at interrupt controller] at acpi0 not configured pnp0200 [at dma controller] at acpi0 not configured npx0 at acpi0 (pnp0c04) npx. : io 0xf0-0xff irq13 Regards, Laurent -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] la part de Hubert Feyrer Envoyé : vendredi 2 juin 2006 00:11 À : g4u-help@feyrer.de Objet : [g4u-help] Broadcom, Dell, HP, IBM users: please test! I've lost track of the number of complaints from users of recent machines from Dell, HP and IBM about g4u not working properly on their machines, or not properly recognizing the Broadcom ethernet chip, so I'm just sending this out in the hope that you read it: Please test http://www.feyrer.de/g4u/g4u-2.3alpha1.iso ... and when you're done, let me know if it works any better OR WORSE!!! than the recently released g4u 2.2. As usual when reporting bugs, please state * what g4u release you're talking about * what the last few lines are if you experience a hanging system * what 'dmesg' says about your disk and network controllers if they are not listed by 'ifconfig -a' and 'disks'. Also, see http://www.feyrer.de/g4u/#bugreporting for more details. For the technically interested, changes in this release are * NetBSD-current sources from today (as someone claimed the Broadcom support's finally fixed) * ACPI and MP-ACPI are enabled - Hubert _______________________________________________ g4u-help mailing list g4u-help@feyrer.de https://lists.sourceforge.net/lists/listinfo/g4u-help _______________________________________________ g4u-help mailing list g4u-help@feyrer.de https://lists.sourceforge.net/lists/listinfo/g4u-help
