Using g4u 2.4alpha3, the onboard Intel nic is not recognized. ifconfig
-a only returns lo0. Works fine with off-board nic. I think the
appropriate line from dmesg is:
Intel product 0x10de (ethernet network, revision 0x02) at pci0 dev 25
function 0 not configured
Just to be sure I covered all the bases, I attached the full dmesg
output.
Thanks for a great product!
David R. Bayer
Scroll down with SPACE or RETURN, press 'q' to quit!
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.3 (G4U-KERNEL) #6: Fri Nov 21 00:47:24 CET 2008
fey...@mini.local:/Volumes/maxi/cvs/src-g4u/sys/arch/i386/compile/obj.i386/G4U-KERNEL
total memory = 3053 MB
avail memory = 2991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq dc7900 Convertible Minitower ( )
PCI BIOS rev. 3.0 found at 0xe9528
pcibios: config mechanism [1][x], special cycles [1][x], last bus 48
PCI IRQ Routing Table rev. 1.0 found at 0xf5310, size 288 bytes (16 entries)
PCI Interrupt Router at 000:31:0
pci_intr_fixup: no compatible PCI ICU found
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2992MHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel 686-class, 2992MHz, id 0x1067a
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20081104>, AslId < ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
NCP (PNP0C04) [Math Coprocessor] at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBD, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
COM1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
APIC (PNP0003) [APIC] at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-1)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
PBTN (PNP0C0C) [ACPI power button device] at acpi0 not configured
WMID (PNP0C14) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2e10 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel product 0x2e11 (rev. 0x03)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x94c1 (rev. 0x00)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
Intel product 0x2e14 (miscellaneous communications, revision 0x03) at pci0 dev
3 function 0 not configured
pciide0 at pci0 dev 3 function 2
pciide0: Intel product 0x2e16 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
Intel product 0x2e17 (serial communications, interface 0x02, revision 0x03) at
pci0 dev 3 function 3 not configured
Intel product 0x10de (ethernet network, revision 0x02) at pci0 dev 25 function
0 not configured
uhci0 at pci0 dev 26 function 0: Intel product 0x3a67 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel product 0x3a68 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: Intel product 0x3a69 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel product 0x3a6c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
Intel product 0x3a6e (multimedia subclass 0x03, revision 0x02) at pci0 dev 27
function 0 not configured
ppb1 at pci0 dev 28 function 0: Intel product 0x3a70 (rev. 0x02)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel product 0x3a78 (rev. 0x02)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: Intel product 0x3a64 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: Intel product 0x3a65 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: Intel product 0x3a66 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel product 0x3a6a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
bge0 at pci4 dev 4 function 0: Broadcom BCM5782 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 20
bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:10:18:0c:1a:1f
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel ICH10DO Watchdog Timer (rev. 0x02)
ahcisata0 at pci0 dev 31 function 2: Intel product 0x3a02
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xe720e020
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
atabus6 at ahcisata0 channel 4
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <ST380815AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus3: 1 targets
atapibus0 drive 0: <TSSTcorp CDDVDW TS-H653N, , HB02> cdrom removable not
configured
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
Kernelized RAIDframe activated
md0: internal 2000 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 115 days
WARNING: CHECK AND RESET THE DATE!
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
g4u-help mailing list
g4u-help@feyrer.de
https://lists.sourceforge.net/lists/listinfo/g4u-help
