Hi Julien, You are right! I read your post and I understand the reason, but you don't speak about Signal 11, so I was thinking for another problem although similar
regards, Dominique Simonart Jussi Lahtinen a écrit : > Hi! > > Is hMyClass declared as Object[] ? > If so, READ cannot recognise hMyClass[i].X as byte. > See my earlier post "Minor bug with READ & WRITE commands?". > I think you have same problem than I did, and in fact it is not bug. > > > Jussi > > > > On Thu, Jan 22, 2009 at 1:06 AM, Dominique SIMONART > <simonart.domini...@wanadoo.fr> wrote: >> Hi everybody, >> >> Gambas 2.8, OpenSuse 11.0, Kde 3.5, with Qt >> If I initialize my property with the next 2 lines, it's OK ( N and >> the X property are defined as Byte, i is an Integer) >> >> READ #hFile, N >> hMyClass[i].X = N >> >> But if I want to write it shorter with the line below, it ends with >> a signal 11! >> >> READ #hFile, hMyClass[i].X >> >> Why? >> Thanks for your help >> Dominique Simonart >> ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user