There is quite good documentation of Gambas. I strongly suggest to look at it.
Application.Busy is not indicator of application doing something. It's not automatically adjusted. http://gambasdoc.org/help/comp/gb.qt4/application/busy?v3 Jussi On Sun, Feb 19, 2012 at 15:25, Bill-Lancaster <bill-lancas...@lineone.net>wrote: > > Thanks for the idea.. > > The exec process runs until finished then the form appears at this point > "application.busy = 0" is executed so "application.busy = 1" state is never > seen! > -- > View this message in context: > http://old.nabble.com/how-to-indicate-progress-tp33351547p33351740.html > Sent from the gambas-user mailing list archive at Nabble.com. > > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
