haaa vector ... what a great thing for great things ... but not for small ones...
does it do the same with a smaller linewidth ? 2012/12/10 Jussi Lahtinen <jussi.lahti...@gmail.com> > OK, makes sense. > One tiny thing more... > > Draw.Foreground = Color.Black > Draw.LineWidth = 3 > Draw.Circle(106, 106, 105) > > Draw.LineWidth = 1 > Draw.FillStyle = Fill.Solid > > > 'this draws very narrow sector > > Draw.FillColor = Color.Black > Draw.Circle(106, 106, 105, Rad(359), Rad(360)) > > > 'this draws little red cross at center point of the sector. > > Draw.Foreground = Color.Red > Draw.Line(104, 106, 108, 106) > Draw.Line(106, 104, 106, 108) > > > However sector is off from center point. > See attachment. > > > Jussi > > > > > On Sun, Dec 9, 2012 at 5:12 PM, Benoît Minisini < > gam...@users.sourceforge.net> wrote: > > > Le 07/12/2012 14:28, Jussi Lahtinen a écrit : > > >> Fixed in revision #5415. > > >> > > > > > > Something is still different from the original behaviour. > > > I use same circle commands to draw pie chart and it still fails... > > > > > > Test output: > > > > > > Area num. 0: in rads; 0 to 0.89759700342775 > > > Area num. 1: in rads; 0.89759700342775 to 1.79519400685551 > > > Area num. 2: in rads; 1.79519400685551 to 2.69279101028326 > > > Area num. 3: in rads; 2.69279101028326 to 3.59038801371102 > > > Area num. 4: in rads; 3.59038801371102 to 4.48798501713877 > > > Area num. 5: in rads; 4.48798501713877 to 5.38558202056653 > > > Area num. 6: in rads; 5.38558202056653 to 6.28317902399428 > > > Area num. 7: in rads; 6.28317902399428 to 0 > > > > > > It seems that drawing area 7 cover the whole chart. > > > So it would be: > > > Draw.Circle(106, 106, 105, 6.28317902399428, 0) > > > > > > 6.28317902399428 is same as Pi(2) or 360 degrees, which means start is > > same > > > as end. > > > > > > I think whole circle should be drawn with this: > > > Draw.Circle(106, 106, 105, 0, 6.28317902399428) > > > > > > And this shouldn't draw anything: > > > Draw.Circle(106, 106, 105, 6.28317902399428, 0) > > > > > > > > > Jussi > > > > Actually the old Draw class was wrong, because you can draw a pie > > clockwise (End > Start) or counter-clockwise (End < Start). So only > > Start = End should not draw anything (or just a line between the center > > and the point at the specified angle). > > > > -- > > Benoît Minisini > > > > > > > ------------------------------------------------------------------------------ > > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial > > Remotely access PCs and mobile devices and provide instant support > > Improve your efficiency, and focus on delivering more value-add services > > Discover what IT Professionals Know. Rescue delivers > > http://p.sf.net/sfu/logmein_12329d2d > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > ------------------------------------------------------------------------------ > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial > Remotely access PCs and mobile devices and provide instant support > Improve your efficiency, and focus on delivering more value-add services > Discover what IT Professionals Know. Rescue delivers > http://p.sf.net/sfu/logmein_12329d2d > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > -- Fabien Bodard ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
