Le 08/10/2014 20:43, Charlie a écrit : > When reading bar-codes the gun adds an "Enter" at the end. In a spreadsheet > if the focus was on cell A1 once the bar-code is read the focus will be in > cell A2 as if "Enter" had been pressed. > > In Gambas using gb.gtk toolkit this works: - > > .... > CatchBarcodeEnter = Key.Code > If Key.Code = Key.Enter Or CatchBarcodeEnter = 65293 Then > .... > > It does not work without the 65293 part. > > This is not recommended as we are warned: - > > "Never compare the value of this property with a numeric constant, because > the key codes may depend on the underlying toolkit. Always use the constants > defined in this class!" > > Do you know how I might get around this? > > Thanks, > > Charlie >
65293 is Key.Return. If you don't want to check both keys (one is the main keyboard, the other is for the numeric pad), just compare Key.Text with "\n". Regards, -- Benoît Minisini ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user