On do, 2014-10-09 at 01:42 +0200, Benoît Minisini wrote: > Le 08/10/2014 23:15, T Lee Davidson a écrit : > > Confirmed with v3.5.4. Except simply opening another project with > > File->Open_project does not clear the incorrect filters. I have to Quit > > and re-launch Gambas to clear them. > > > > > > On 10/08/2014 10:53 AM, Willy Raets wrote: > >> Try this at home and see what goes wrong. > >> Both 3.5.4 and 3.5.90 (rev#6521) show this behaviour. > >> > >> 1. Open a project in IDE > >> 2. In project browser > >> - right click 'Sources' > >> - select 'New' > >> - select 'Module' > >> - Click tab 'Existing' > >> - 'Gambas modules (*.module) is the correct filter set > >> 3. Repeat step 2 for Class, Form and Report (if gb.report activated) > >> All should be good so far and correct filters should be shown. > >> > >> 4. In Project browser > >> - right click 'Data' > >> - select 'New' > >> - select 'Image' > >> - click tab 'Existing' > >> - 'Gambas modules (*.module) is the WRONG filter set!! > >> 5. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other > >> You see what goes wrong in the filter. > >> Somehow the filters of Sources are kept. > >> > >> No to make it even odder try this: > >> 1. Open ANOTHER project in IDE (important) > >> 2. In Project browser > >> - right click 'Data' > >> - select 'New' > >> - select 'Image' > >> - click tab 'Existing' > >> - 'Images files (*.png,*jpg,..) is the correct filter set > >> 3. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other > >> All should be good so far and correct filters should be shown. > >> > >> 4. In project browser > >> - right click 'Sources' > >> - select 'New' > >> - select 'Module' > >> - Click tab 'Existing' > >> - 'Images files (*.png,*jpg,..) is the WRONG filter set!! > >> 5. Repeat step 2 for Class, Form and Report (if gb.report activated) > >> You see what goes wrong in the filter. > >> This time the filters of Data are kept. > >> > >> So, filters seem to depend on if you first right clicked 'Sources' or > >> 'Data' in the Project browser. > >> > > > > I fixed the behaviour of that dialog in revision #6522. If you can tell > me if it is ok for you... >
I can confirm it is fixed. Thanks again. -- Kind regards, Willy (aka gbWilly) http://gambasshowcase.org/ http://howtogambas.org http://gambos.org ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user