I have 480 volt 3 phase in my mills and I use Hitachi  VFD's to increase the 
speed of the fans. I have driven some of them as 300 hz , at which they 
saturate 
and stop rotation . At 120hz I am getting 7200 rpms out the fans. Hatichi 
builds 
fractional hp VFD's that can be run on 220 volt single phase and the VFD 
converts single phase to 3 phase. That feature is quite handy and they are easy 
to set up.
Les Freeman


>
>From: "[email protected]" <[email protected]>
>To: [email protected]
>Sent: Sat, November 13, 2010 9:35:53 AM
>Subject: Re: [Gasification] tests to design a new cheap gasifier fan
>
>Arnt,
>
>True, if you need psi of pressure boost not inches of water.  I will try to 
>add 
>numbers to this post later today.  
>
>
>Stephen
>-----Original Message-----
>From: Arnt Karlsen <[email protected]>
>To: gasification <[email protected]>
>Sent: Sat, Nov 13, 2010 4:52 am
>Subject: Re: [Gasification] tests to design a new cheap gasifier fan
>
>
>On Fri, 12 Nov 2010 18:13:12 -0800 (PST), Les wrote in message   
><[email protected]>:    > To: Discussion of biomass 
>pyrolysis and gasification   > <[email protected]  >   > 
>Has 
>anyone tryed using the rotor out of a turbocharger to make a fan  > for a 
>gasifier. I have taken the compressor end apart and made an  > adapter to 
>mount 
>on a C face motors, usually 3600 rpm, for a high  > volume vac system to move 
>solids. Les Freeman    ..you would need to gear up that turbocharger fan so it 
>can   do turbocharger speeds, they easily exceed e.g. 136000rpm,  for common 
>automotive sizes.    --   ..med vennlig hilsen = with Kind Regards from 
>Arnt... 
>;o)  ...with a number of polar bear hunters in his ancestry...    Scenarios 
>always come in sets of three:     best case, worst case, and just in case.    
>_______________________________________________  Gasification mailing list    
>to 
>Send a Message to the list, use the email address  
>[email protected]    to UNSUBSCRIBE or Change your List Settings 
>use the web page  
>http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>    for more Gasifiers,  News and Information see our web site:  
>http://gasifiers.bioenergylists.org/    
>


      
_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/

Reply via email to