Art,
You seem to be describing the Osborn Hay Cuber. US Patent US3963405 http://www.google.com/patents?id=DwsxAAAAEBAJ <http://www.google.com/patents?id=DwsxAAAAEBAJ&printsec=frontcover&dq=US3963 405&hl=en&ei=rwXrTf_SE5CcgQet4o3ZCQ&sa=X&oi=book_result&ct=result&resnum=1&v ed=0CCgQ6AEwAA> &printsec=frontcover&dq=US3963405&hl=en&ei=rwXrTf_SE5CcgQet4o3ZCQ&sa=X&oi=bo ok_result&ct=result&resnum=1&ved=0CCgQ6AEwAA We new Glen Osborn very well. He was from Moses Lake, Washington. We used his cuber at the Straw Utilization Center in Corvallis from 1974-1977. We used three Osborne cubers in a facility to treat straw with sodium hydroxide and to cube 10,000 tpy straw for export to Japan. We owned one for several years after that and used it in California, Oregon and Idaho for cubing everything from ensiled food wastes to paper waste for fuel. I'll have to check to see what our actual production was. The cuber was robust. It was not as efficient as those made later by Warren & Baerg. It would take a coarsely shredded or ground material and make a fairly hard cube. I am sure that lots of energy was lost in the flailing and mixing action of the gears and feed mechanism. It did run smoothly when you have a uniformly sized material and ran a proper head of material over the gears. Unplugging the dies that are internal to the gears was a challenge. Regards, Tom Miles
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
