Dear AD

Very interesting!!

Is the charcoal that is activated by CaCl2 "good for everything that activated 
charcoal is good for", or is it perhaps equally good for some tasks, but not 
necessarily as good for all?

What applications have you used the CaCl2 activated charcoal in?

What % by weight CaCl2, would you use?

Thanks!

Kevin
  ----- Original Message ----- 
  From: Anand Karve 
  To: Discussion of biomass pyrolysis and gasification 
  Sent: Sunday, February 19, 2012 10:21 PM
  Subject: Re: [Gasification] Active charcoal


  Dear Darius,
    Normally one needs relatively high temperature to make active charcoal, but 
the pretreatment with calcium chloride allows us to make active charcoal even 
at relatively low temperatures. We make charcoal from light biomass like 
agricultural waste and use a TLUD type kiln. You would have to conduct 
experiments using your biomass and your process of charring to see if this 
pretreatment works in your case or not. 
  Yours
  A.D.Karve

  On Sat, Feb 18, 2012 at 11:01 PM, Darius <[email protected]> wrote:

    Dear Dr. A.D. Karve

    Charring material are rubber wood.

    Could you tell me the detail process?

    Regards,

    Darius

    On 2/18/2012 9:56 PM, Anand Karve wrote: 
      Dear Darius,
      what material are you charring? We make our charcoal from leaves of 
sugarcane, which are discarded during the process of sugarcane harvest. By 
soaking the leaves in 5% solution of calcium chloride, dying them and then 
converting them into char in a TLUD kiln gives us active charcoal. We have not 
tested this process in the case of woody material. Perhaps you can do this 
experiment. 
      Yours
      A.D.Karve

      On Sat, Feb 18, 2012 at 10:14 PM, Darius <[email protected]> 
wrote:

        Dear all,
         
        Is somebody  there can help me to convert our char into active charcoal?

        Regards,

        Darius

         
        Dr. A.D. Karve
        Trustee & Founder President, Appropriate Rural Technology Institute 
(ARTI)




       

_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/



    _______________________________________________
    Gasification mailing list

    to Send a Message to the list, use the email address
    [email protected]

    to UNSUBSCRIBE or Change your List Settings use the web page
    
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

    for more Gasifiers,  News and Information see our web site:
    http://gasifiers.bioenergylists.org/





  -- 
  ***
  Dr. A.D. Karve
  Trustee & Founder President, Appropriate Rural Technology Institute (ARTI)





------------------------------------------------------------------------------


  _______________________________________________
  Gasification mailing list

  to Send a Message to the list, use the email address
  [email protected]

  to UNSUBSCRIBE or Change your List Settings use the web page
  
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

  for more Gasifiers,  News and Information see our web site:
  http://gasifiers.bioenergylists.org/



------------------------------------------------------------------------------


  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2012.0.1913 / Virus Database: 2112/4817 - Release Date: 02/18/12
_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/

Reply via email to