Great one Doug, that is about what I had in mind and saves me that drawing :-) With playing around with pivot points it would be feasible to get peak leverage exactly where you want it,. Enough weight in the right place returns the foot pedal to the start point. Yes you have proven the concept.
Kind Regards Jason On Sat, Jan 25, 2014 at 10:45 AM, Doug <[email protected]> wrote: > > Hi Jason and Colleagues, > > > Thanks for all the ideas that have been promoted, and as you can see, I > have completed all the variations possible within the limitations imposed > by existing mechanisms. This pedal linkage allowed me to change rotating > arcs, which in the end all determine the distance of travel and the forces > at the cutting edge. > > Having proven the simple hand guillotine both works and with a reasonable > amount of force at the blade, that is the end of my involvement to make the > concept principles into some thing else. It isn't hard for me to see, that > larger mechanised versions could have plenty of scope to be included in all > sorts of cutting applications, but don't expect me to design them for > you(:-) > > Will find time this week to draw up the design and make it available on > the Fluidyne Archive www.fluidynenz.250x.com as soon as possible, and > advise you accordingly. > > Doug Williams, > Fluidyne. > > > > > > On Sat, 25 Jan 2014 08:42:51 +1300 > > Jason <[email protected]> wrote: > > > > > Doug, > > > > > > I have an idea for the foot lever but will need a day so to get it > drawn. > > > It MAY help the design and hopefully incorporate increasing leverage to > > > solve the issue Mark outlines. > > > > > > Jason > > > -- > Doug <[email protected]> > > _______________________________________________ > Gasification mailing list > > to Send a Message to the list, use the email address > [email protected] > > to UNSUBSCRIBE or Change your List Settings use the web page > > http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org > > for more Gasifiers, News and Information see our web site: > http://gasifiers.bioenergylists.org/ > >
_______________________________________________ Gasification mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org for more Gasifiers, News and Information see our web site: http://gasifiers.bioenergylists.org/
