Hope someone can help. I'm trying to connect a VPN client (Latest ver 8.0.2 b2) to a GB-100 with ver 3.1.2 Firstly - is this possible as you are unable to setup Mobile VPN, only IKE or Manual in ver 3.1.2
I've setup IKE and followed the setup guide - created all the RA & Pass thru filters. I get the following on the client log viewer : initiating IKE phase 1 SENDING>>>>> ISAKMP OAK AG (SA, KE, NON, ID, VID 4x) message not recieved! Retransmitting! SENDING>>>>> ISAKMP OAK AG (Retransmission) But the firewall logs states : Nov 14 12:46:47 FILTER: Remote access filter accepts : UDP xl0 [src-ip/500]->[dst-ip/500] l=353. Nov 14 12:46:47 FILTER: 21 matches for: Accept ANY UDP log from "ANY_IP" 500 to "ANY_IP" 500 Nov 14 12:46:47 FILTER: Received UDP xl0 [src-ip/500]->[dst-ip/500] l=353. But nothing. Any ideas????? Thanks Andrew Booth This e-mail and its attachments are intended for the above named recipient(s) only and may be confidential, legally privileged and protected by law. If you are not a named addressee or have received this transmission in error, please notify us immediately at [EMAIL PROTECTED] and then delete this e-mail. As Internet communications are not secure we do not accept legal responsibility for the contents of this message or responsibility for any change made to this message after the original sender sent it. Save for this legal notice, the contents or opinions contained within this e-mail are solely those of the sender and do not necessarily represent those of Two Way TV Ltd unless otherwise specifically stated. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/gb-users@;gta.com
